Mitsubishi PLC

Product Details:

• Type - FX5UPower
• Supply - (V)100-240
• Current Type - AC
• Program Memory - 64K STEPS
• Program Memory Unit - FLASH
• Integrated Digital Inputs - 16
• Integrated Digital Outputs - 16
• Integrated Analogue Inputs - 2
• Output Type - RELAY
• Local I/O Points - 256
• Local + Remote I/O Points - 512
• Expandable - YES
• Cycle Time LD (ns) - 34
• Cycle Time MOV (ns) - 34
• Ethernet Port - 1
• RS-485 - 1
• Power Consumption (W) - 30
• Buffer Battery - OPTION
• Protection Class - IP10
• Min.Ambient Temperature (°C) - 0
• Max. Ambient Temperature (°C) - 55
• SeriesMELSEC IQ-F SERIES

Product Details:

• Type - FX3S
• Power Supply - 100-240
• Current Type - AC
• Digital Input - 12
• Digital Output - 8
• Local I/O Point - 30
• Local + Remote I/O Point - 30

Product Details:

MITSUBISHI MAKE INPUT MODULE FX5-8EX/ES

MODEL: FX5-8EX/ES

FX5; I/O Extension; 8 Inputs

Additional Information:

• Production Capacity: As per requirements
• Delivery Time: Ex-stock
• Packaging Details: As per Millennium Standards

Product Details:

Output extension block Series, MELSEC-F SERIES. Type, FX2N. Occupied I/O Points on PLC, 16. Integrated Digital Inputs, 16. Integrated Digital Outputs, 16. Output Type, TRANSISTOR.

 

Additional Information:

• Production Capacity: As per Requirements
• Delivery Time: Ex-stock
• Packaging Details: As per Millennium Standards

Product Details:

Product Details:

MITSUBISHI Q-SERIES CPU

Q00UCPU
Q00UJCPU
Q01UCPU
Q02UCPU
Q02HCPU
Q03UDVCPU
Q03UDECPU
Q06UDVCPU
Q13UDVCPU
Q170MCPU-S1
Q172DSCPU
Q173DSCPU

MITSUBISHI Q-SERIES POWER SUPPLY

Q61P
Q62P
Q63P

MITSUBISHI Q-SERIES BASE RACK

Q35B
Q38B
Q65B
Q312B
Q64PN

MITSUBISHI Q-SERIES I/0 MODULES

QX10
QX40
QX41
QX42
QX80
QX81
QX82

QY10
QY40P
QY41P
QY42P
QY80
QY81P
QY82P

Product Details:

I/O module - Mitsubishi Electric (MELSEC iQ-F Series) - 16I/O [16DO (16 x digital outputs (Rly. NO contacts))] - with screw-clamp term. connections - DIN rail mounting - equivalent to FX516EYRES

Additional Information:

• Production Capacity: As per requirements
• Delivery Time: Ex-stock
• Packaging Details: As per Millennium Standards

Product Details:

An input conversion characteristic of A/D conversion is expressed by the slope of the straight line connecting the offset value and the gain value at the time when an analog input (voltage or current) from outside the programmable controller is converted to a digital value.

Additional Information:

• Production Capacity: As per requirements
• Delivery Time: Ex-stock
• Packaging Details: As per Millennium Standards

Product Details:

MITSUBISHI MAKE INPUT MODULE FX5-16EX/ES

MODEL: FX5-16EX/ES

FX5; I/O Extension; 16 Inputs

Additional Information:

• Production Capacity: As per requirements
• Delivery Time: Ex-stock
• Packaging Details: As per Millennium Standards

Product Details:

·         Series - MELSEC IQ-F SERIES

·         Type - ANALOG OUTPUT

·         Power Supply (V) – 24

·         Current Type – DC

·         Integrated Analogue Outputs – 4

·         Output Voltage Range (V) - -10-10; 0-10; 0-5; 1-5

·         Output Current Range (mA) - 0-20; 4-20

·         Min. Ambient Temperature (°C) – 0

·         Max. Ambient Temperature (°C) - 55

Additional Information:

• Delivery Time: Ready Stock

Product Details:

FX5;Analog Output Module;4 channels

FA-COM PLC: ANALOGUE I/O MODULE

• Series: MELSEC iQ-F Series
• Type: Analog output
• Power Supply (V) : 24
• Current Type: DC
• Integrated Analog Outputs: 4

Additional Information:

• Production Capacity: As per requirements
• Delivery Time: Ex-stock
• Packaging Details: As per Millennium Standards

Product Details:

Product Details :
Witness the evolution of the micro PLC. Designed on the concepts of outstanding performance, superior drive control, and user centric programming, Mitsubishi's MELSEC-F Series has been reborn as the MELSEC iQ-F Series.

iQ Platform for maximum return on investment
Minimize Total cost, Seamless integration, Maximize productivity, Transparent communications: these are common items that highlight the benefits of the iQ Platform. Enhanced further with the arrival of the new MELSEC iQ-F Series Programmable Logic Controller (PLC), reducing costs and improving productivity can be realized even easier. The iQ Platform minimizes TCO at all phases of the automation life cycle by improving development times, enhancing productivity, reducing maintenance costs, and making information more easily accessible.
PLC & HMI

• The new MELSEC iQ-F Series system bus is 150-times faster
• realizing improved system performance
• Program standardization through function blocks and
• module labels
• Powerful and robust security features

Network

• CC-Link IE Field, 1Gbps high-speed and large bandwidth communications network
• Seamless connectivity within all levels of manufacturing with SLMP

Engineering

• Automatic generation of network configuration diagram
• Share parameters across multiple engineering software via MELSOFT Navigator

Integrated Functions
Built-in Analog
FX5U is equipped with analog control capabilities right out of the box. No ladder logic is required when using parameter setting in the programming software
Built-in SD Card Slot
External memory is useful for updating PLCs in the feld. Program can be loaded onto SD card and then transferred to as many PLCs as necessary.

SD card can also be used for
data logging. Record keeping is important for data analysis and tracking machine performance.
Built-in RS-485(MODBUS®) Communication
For related systems and data transfer with external equipment and third party devices, serial communication has long been the established connection method. Serial communication allows the FX5U to connect both eciently and reliably with other PLCs, sensors, printers, and modems, etc. Multi-drop networks, non-protocol communication, and remote maintenance are just some of the many uses.

High-speed System Bus
The MELSEC iQ-F high speed system bus provides seamless data transfer from/to the CPU. With new architecture that realizes data speeds of 1.5 k words per ms (150-times faster than FX3U), fast response is guaranteed even when using expansion modules.
Built-in Ethernet port
In the information age, Ethernet has become the personal, commercial and industrial standard for easy and ecient data transfer. Whether it is between multiple PLC systems or PLC and PC servers, industrial users dictate foremost that data must always be consistent even in high-noise environments.

• Input 5-240 V AC
• Out 5-30 V DC
• 50-60Hz

Additional Information:

• Production Capacity: As per requirements
• Delivery Time: Ex-stock
• Packaging Details: As per Millennium Standards

Product Details:

Additional Information:

• Delivery Time: Ready Stock

Product Details:

PLC, FX3U Analog input module; 12 bit; 4 analog inputs for current or voltageThe analog special adapters have been found to be compliant to the European standards in the aforesaid manual and directive. However, for the very best performance from what are in fact delicate measuring and controlled output device Mitsubishi Electric would like to make the following points; As analog devices are sensitive by nature, their use should be considered carefully. For users of proprietary cables (integral with sensors or actuators), these users should follow those manufacturers installation requirements. Mitsubishi Electric recommend that shielded cables should be used. If NO other EMC protection is provided, then users may experience temporary loss or accuracy between ±10 % in very heavy industrial areas.

Additional Information:

• Production Capacity: As per requirements
• Delivery Time: Ex-stock
• Packaging Details: As per Millennium Standards

Product Details:

The Mitsubishi Fx5 8ad Module is a high-performance and versatile module that allows for easy input of analog signals into your PLC system. With its compact design and reliable performance, this module is perfect for a wide range of industrial applications.

Additional Information:

• Delivery Time: 2 days

Product Details:

Product Details:

Analog input module - Mitsubishi Electric (MELSEC-F (FX) Series FX5U) - 4I/O [4AI (4 x analog inputs (Thermocouple types K; J; T; B; R; S; 16-bit + sign conversion))] - equivalent to FX54ADTCADP

Additional Information:

• Production Capacity: As per requirements
• Delivery Time: Ex-stock
• Packaging Details: As per Millennium Standards

Product Details:

TEMPERATURE MODULE: 

PLC, FX3U Analog input module for thermo-elements; 4 thermo-coupler inputs

TECHNICAL INFORMATION: 

• Series: MESELEC-F Series
• Type: FX3U
• Power Supply (V): 24
• Current Type: DC
• Integrated Analog Inputs: 4
• Input Type: Thermocouple

Additional Information:

• Production Capacity: As per requirements
• Delivery Time: Ex-stock
• Packaging Details: As per Millennium Standards

Product Details:

FA-COM PLC: Serial Com Module
FX5;Serial Communication Adapter;RS-485

• Series: MELSEC IQ-F Series
• Type: FX5
• Interface: RS-485
• Width: 17.6mm
• Height: 90mm
• Depth: 74mm

Additional Information:

• Production Capacity: As per requirements
• Delivery Time: Ex-stock
• Packaging Details: As per Millennium Standards

Product Details:

Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable.Developed a range of special function modules to meet the needs of different - analog I/O, high speed counter.Positioning control to achieve the 16 axis, the pulse train output or for the J and K type thermocouple or Pt sensor developed the temperature module.A total of 8 special function modules can be configured for each FX2n main unit.Note recording function, Component annotation can be recorded in the program register.Online program editor, online change the program will not lose the working hours or stop production operation.RUN/STOP switch, running on panel / stop switch easy to operate.Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communicationsPassword protectioon, using a eight digit password to protect your program FX2N-16EYR-ES/UL.Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.Continuous scanning function, to define the operation cycle for the application off the continuous scan time FX2N-16EYR-ES/UL.Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).

Additional Information:

• Production Capacity: As per requirements
• Delivery Time: Ex-stock
• Packaging Details: As per Millennium Standards

Product Details:

Product Details:

• ·         Type – FX3S
• ·         Power Supply (V) – 100-240
• ·         Current Type – AC
• ·         Program Memory –  16K STEPS
• ·         Program Memory Unit – EEPROM
• ·         Integrated Digital Inputs – 16
• ·         Integrated Digital Outputs – 14
• ·         Output Type – TRANSISTOR
• ·         Output Logic – SOURCE
• ·         Local I/O Points – 30
• ·         Local + Remote I/O Points – 30
• ·         Expandable – NO
• ·         Cycle Time LD (ns) – 210
• ·         Cycle Time MOV (ns) - 500
• ·         RS-422 – 1
• ·         Power Consumption (W) – 21
• ·         Buffer Battery – No
• ·         Protection Class - IP10
• ·         Min. Ambient Temperature (°C) – 0
• ·         Max. Ambient Temperature (°C) – 55
• ·         Series - MELSEC-F SERIES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Details:

Product Details:

PLC, FX3U Analog output module; 12 bit; 4 analog outputs for current or voltage

FA-COM PLC: Analogue I/O Module

• Series: MELSEC-F Series
• Type: FX3U
• Power Supply (V) : 24
• Current Type: DC
• Integrated Analog Outputs: 4
• Output Voltage Range (V): 0-10
• Output Current Range (mA) : 4-20

Additional Information:

• Production Capacity: As per requirements
• Delivery Time: Ex-stock
• Packaging Details: As per Millennium Standards

Product Details:

• High speed inputs & outputs
• Analogue and PID
• Mark detection
• Built in Ethernet
• Backward compatibility
• Simple troubleshooting
• Security functions to protect your intellectual property
• Sophisticated 4 axis motion control with optional Simple Motion Module
• A 2nd RS485/422/232 communications interface can be added
• Can be mounted on DIN rail or a flat surface
• Password access protection
• 64,000 step program EEPROM memory
• Slot for memory cassettes
• Integrated real time clock
• Integrated positioning control
• Exchangable interface & I/O adapter boards
• I/O, ADP & special function modules available
• User friendly programming systems

Product Details:

MITSUBISHI Q-SERIES I/0 MODULES

QX10
QX40
QX41
QX42
QX80
QX81
QX82

QY10
QY40P
QY41P
QY42P
QY80
QY81P
QY82P



MITSUBISHI Q-SERIES CPU

Q00UCPU
Q00UJCPU
Q01UCPU
Q02UCPU
Q02HCPU
Q03UDVCPU
Q03UDECPU
Q06UDVCPU
Q13UDVCPU
Q170MCPU-S1
Q172DSCPU
Q173DSCPU

MITSUBISHI Q-SERIES POWER SUPPLY

Q61P
Q62P
Q63P

MITSUBISHI Q-SERIES BASE RACK

Q35B
Q38B
Q65B
Q312B
Q64PN